Author Archive | Doug Napier

Overcome Fear and Gain Confidence in Soldering (FREE VIDEO)

3rd FREE VIDEO this week:

Overcome Fear and Gain Confidence in Soldering

Let me tell you another quick story:

A man was on vacation, and as he was walking, he saw some the elephants, he suddenly stopped, confused by the fact that these huge creatures were being held by only a small rope tied to their front leg. There were no chains, no cages, just a small rope. It was obvious that the elephants could, at anytime, break away from their bonds but for some reason, they did not……

He saw a trainer nearby and asked why these animals just stood there and made no attempt to get away. “Well,” trainer said, “when they are very young and much smaller we use the same size rope to tie them and, at that age, it’s enough to hold them. As they grow up, they are conditioned to believe they cannot break away. They believe the rope can still hold them, so they never try to break free.”      The man was amazed. These animals could at any time break free from their bonds but because they believed they couldn’t, they were stuck right where they were.

Like the elephants, how many of us go through life hanging onto a belief that we cannot do something, simply because we failed at it once before?  Failure is part of learning; we should never give up the struggle in life.


In this 3rd Video in a Series I have released this week, I will deal with FEAR and CONFIDENCE in our jewelry making.

FEAR and Lack of Confidence doesn’t have to keep you from pursuing your dreams?

The tools are just that….TOOLS, and with a little safety, practice, and a little education….. They can be mastered instead of letting them master your dreams.   If you OWN THE Experience, You Have the Power to Transform, You have the The Mastery of Knowledge!

So in this latest video, I do just that, tackle some of those issues that KEEP US FROM GROWING:

 CLICK HERE FOR FREE VIDEO

 CLICK HERE FOR FREE VIDEO


Since 2014, JewelryMonk.com has been focused on Educating and Encouraging people in all aspects of jewelry making, and I will continue to do so through any and all means I can. Either through this page, the JewelryMonk FaceBook page, The JewelryMonk Podcast, or any other way I can find, my mission is to pass along this jewelry knowledge I have.

So come along this Journey with me and

Together, We Can Make The Best Jewelry Of Your Life!

As Always, Thanks for stopping by, Share this with a Friend, and get out there and Make Something Shiny!

Doug

0

Tool Modification and Soldering Principles (FREE VIDEO)

MORE FREE VIDEO TEACHINGS…..

But first, a story.

Three years ago, I was laying in a hospital bed, healing from surgery, and wondering about my future, what would it look like, would I even have much of a future? Encouragement was my friend, and I needed plenty of it, but you know what, I was the one who ended up being the “Encourager” to my friends and family. I could see the worry in their faces, but I was there to tell them “I got this, It’s ALL GOOD!” My nature is like that, it is my “default” and I get energy from it.

Fast Forward a few years, I am still like that. I am all healed up, Doctors say 3 years “C”-Free and I am moving forward to a brighter future. I don’t dwell on the past, but I don’t forget the lessons the past has taught me, and I am better for it.

All this to say, I am still am Encourager, and I have focused that energy into my Jewelry Education.

This week I am releasing a few videos that hopefully tries to get across this message of Education and Encouragement, and today is the 2nd in a series of FREE Videos. This FREE video will show how and why I Modify My Tools, and also will give a simple, but important Soldering Principle.

 CLICK HERE FOR FREE VIDEO CLICK HERE FOR FREE VIDEO

Since 2014, JewelryMonk.com has been focused on Educating and Encouraging people in all aspects of jewelry making, and I will continue to do so through any and all means I can. Either through this page, the JewelryMonk FaceBook page, The JewelryMonk Podcast, or any other way I can find, my mission is to pass along this jewelry knowledge I have.

So come along this Journey with me and

Together, We Can Make The Best Jewelry Of Your Life!

As Always, Thanks for stopping by, Share this with a Friend, and get out there and Make Something Shiny!

Doug

2

Overview Video of Jewelry Concepts Method

Would You Like to LEARN Jewelry Making,

or Enhance Your Jewelry Making Skills?

I have created a few FREE VIDEOS to help you, and to give you Tips, and Continued Encouragement. Over the next week, I am going to be releasing these FREE VIDEOS to do just that.

This is the FIRST of them,

Click on the Video Button:

Ask yourself:

Have you ever wanted to take your jewelry skills to the next level?

Have you ever wanted to make jewelry or Advance your skills, but thought it was too complicated?

Where do you see your jewelry skills going in the next year?

Stay tuned over the next week, and I will be talking and teaching about some jewelry concepts including:

Fabricating, Soldering, Tool Modification, Safety, As well as some other encouraging topics.


SO do me a favor…….

After the video, Scroll Down and Leave a Comment.

I want to know if it was helpful and what your thoughts are.

As always, Take Care…..

Doug

Now….. Go Make Something Shiny

0

022 New JewelryMonk Podcast

New Episode of The JewelryMonk Podcast


Jewelry Maker’s Square in Stainless Steel

FREE VIDEO DEMONSTRATION:

https://youtu.be/bMcFNHiToJk

Limited Quantities:

I have used one of these for over 20 years, and have not seen them anywhere. I built my first one, and so I made a number of others, because I am sure I am not the only one who has wanted to use one over the years.
If you do not lose it, it will last you a lifetime.
Good for marking 90 degree angles, making square settings and square pieces, marking straight lines, etc.
I keep mine handy, and use it many times a week.

It measures 32mm long, 21mm tall, and it is made out of 20 Gauge Stainless Steel (0.65mm)
Includes FREE Shipping.

I have a limited supply, so when they are gone…. they are gone, and I don’t know if I will make any more. I DO NOT want to be in the tool making/selling business.


OK, Time to highlight some who are doing it right…..

BloodWater.org

Clean water is essential to healthy living, and BloodWater.org works to ensure that water is always provided alongside sanitation and hygiene training to maximize its benefits.   They work with their local partners to provide access to clean water through a wide range of technologies. With knowledge of the local people, them and their partners select the technology that will be most effective in the community where they are working based on environmental, cultural, economic, and technological factors to optimize quantity, quality, access, and reliability. In many cases, a combination of technologies is required to achieve these goals.   The best gift this holiday season can’t be found in stockings on the mantle, fit in festively-wrapped boxes, or travel well in a sleigh… For Many, The best gifts, and most common solution is CLEAN WATER, which include wells with hand pumps or mechanized wells, spring protection, rain catching systems, surface catching systems, and household-level filtration and treatment.

Check out BloodWater.org to see how you can make a difference.

Join Them at www.bloodwater.org

https://vimeo.com/100353577


Time to talk about your health:

OK, Trust me on this one……. Take 2-3 Minutes and do these things, and you WILL feel better!


COMING SOON:

I just finished up with my Next Video Course which I am calling The Fabricated Pendant Project, a Video Course focused on Fabrication and Soldering. It is a Video Series that Takes you Step by Step, from drawing all the way through, to a finished piece of reproducible jewelry.

ALSO COMING SOON:

The JewelryMonk Studio and Training Center, which I plan on opening at the beginning of 2018   I have hinted at this on social media,  But in a nutshell, I live in a beautiful part of the country, and I want to create a place where people can get away from their hectic, stressful daily routine, and learn a specific craft ………..and at the same time, see an interesting part of the country.  I will release my plans soon, but it will be focused on teaching beginner and intermediate classes on Fabricating, Soldering, Stone Setting, and possibly some advanced teachings later on, like Casting, Mold Making, and Model Making, CAD. I live in the Black Hills of South Dakota, this is where the Studio and Training Center will be located. I will soon be creating and announcing 1-2 week courses teaching in small groups, but will set aside time to check out the beautiful area I live in, like Mount Rushmore, Crazy House Mountain, Deadwood, and The Badlands National Park. Also there are many events in the downtown area in the evenings with local bands, microbreweries, eclectic shopping and an interesting art scene. Again, Follow JewelryMonk.com for details.


As Always, Thanks for stopping by and if you find value in this content, or if you like to keep up to date on the goings-on here, make sure to  Subscribe to the JewelryMonk Website (link in the upper right corner of www.JewelryMonk.com)  also if you know someone who makes jewelry, tell them about this site or The JewelryMonk Podcast.  That means the world to me!

You can also follow JewelryMonk on Facebook, Twitter, Pinterest, Instagram, YouTube, Snapchat,…. we are all over the place.

Now go make something Shiny!

Doug

 

0

Jewelry Maker’s Square Now Available

Jewelry Maker’s Square in Stainless Steel

Limited Quantities:

I have used one of these for over 20 years, and have not seen them anywhere. I built my first one, and so I made a number of others, because I am sure I am not the only one who has wanted to use one over the years.
If you do not lose it, it will last you a lifetime.
Good for marking 90 degree angles, making square settings and square pieces, marking straight lines, etc.
I keep mine handy, and use it many times a week.

It measures 32mm long, 21mm tall, and it is made out of 20 Gauge Stainless Steel (0.65mm)
Includes FREE Shipping.

I have a limited supply, so when they are gone…. they are gone, and I don’t know if I will make any more. I DO NOT want to be in the tool making/selling business.

Early Stocking Stuffer Ideas?

As Always,  if you find value in this content, or if you like to keep up to date on the goings-on here, make sure to  Subscribe to the JewelryMonk Website (link in the upper right corner of www.JewelryMonk.com)  also if you know someone who makes jewelry, tell them about this site or The JewelryMonk Podcast.  That means the world to me!

You can also follow JewelryMonk on Facebook, Twitter, Pinterest, Instagram, YouTube, Snapchat,…. we are all over the place.

Now go make something Toolish? and Shiny!

Doug

0