What if working smarter is actually part of becoming a better craftsman?
After a bunch of years at the jewelry bench, I’ve learned that experience should teach us more than how to do something well.
It should also teach us how to do it better.
And sometimes, that means recognizing when it’s time to stop doing the same thing over and over again.
Bench Lesson:
Make It Once. Make It Better. Make It Again.
Last week, I shared a video showing how I solder a silver bezel to a backplate.
It was a fairly simple project. I had a collection of small agate stones, all approximately the same size, and I wanted to create some jewelry with them.
But here’s the thing.
I had about 20 or 30 of these stones!
Now, I could have sat down and made 20 or 30 individual bezel settings. And I certainly know how to do that.
But I started thinking…
Why should I make the same thing 30 times when I could make it once and reproduce it?
So that’s exactly what I did.
I fabricated one bezel setting, finished it into a master model, and made a mold.
From there, I could inject waxes, invest and cast the pieces, and finish them into pendants and earrings.
Instead of starting from scratch every time, I created a process that allows me to make multiple pieces of jewelry from one original design.
And I filmed the entire journey!
Life Lesson:
Experience Should Make Us Wiser, Not Just Faster
I think there’s a lesson here that reaches far beyond jewelry making.
Sometimes we get so good at doing something that we never stop to question whether there’s a better way.
We develop routines. We become comfortable with our processes. And before long, we find ourselves doing things simply because that’s how we’ve always done them.
But there’s a difference between getting better at doing something and getting better at thinking about how we do it.
Wisdom isn’t just knowing how to work hard.
It’s knowing when to step back, evaluate what we’re doing, and make adjustments that help us use our time and abilities more effectively.
The Problem:
Confusing Hard Work With Progress
As craftsmen (and craftswomen), we sometimes take pride in doing everything the hard way.
We enjoy working with our hands. We appreciate the challenge. And there’s a certain satisfaction that comes from creating something entirely from scratch.
There’s nothing wrong with that!
But sometimes we confuse working harder with becoming better.
We repeat the same tasks, solve the same problems, and spend our time doing things we’ve already figured out how to do.
And before we know it, we’re so busy making things that we don’t have time to improve the way we make them.
I’ve certainly been guilty of that myself!
And the danger isn’t just wasted time.
It’s that we can become so focused on getting through today’s work that we stop developing the skills, systems, and habits that could make tomorrow’s work better.
The Solution:
Improve the Process, Not Just the Product
One of the greatest lessons I’ve learned in craftsmanship is that experience should teach us more than how to do something. It should teach us how to improve the process.
That might mean making a mold so you don’t have to fabricate the same setting repeatedly.
It might mean modifying a tool to make a task easier.
It might mean organizing your bench so you aren’t constantly searching for something.
Or it might simply mean taking a few minutes to think before jumping into the next project.
The goal isn’t to eliminate craftsmanship.
The goal is to eliminate unnecessary work so we have more time and energy for the craftsmanship that really matters.
And this applies to more than jewelry.
Whether you’re running a business, learning a new skill, or simply trying to manage your daily responsibilities, there’s value in occasionally asking yourself:
Is there a better way to do this?
Sometimes the most productive thing we can do is stop working long enough to figure out how to work better.
Encouragement:
Keep Learning, Keep Improving
Here’s something I want to encourage you with this week.
You don’t have to change everything overnight.
You don’t need a completely new workshop, expensive equipment, or some revolutionary technique to become a better craftsman.
Sometimes improvement begins with one small adjustment.
One tool modification.
One better habit.
One process that saves you a few minutes.
And those little improvements add up.
Becoming a better craftsman isn’t always about learning something new. Sometimes it’s about finding a better way to use what you already know.
In this week’s video, “From One to Many | The Complete Jewelry Making & Casting Process,” I’m sharing the entire journey of turning one handmade bezel into multiple finished pendants and earrings.
You’ll see mold making, wax injection, casting, grinding, tumbling, stone setting, polishing, and final assembly.
It’s a little different from my normal tutorials. Instead of talking through every step, I’ve put together a visual journey with music and on-screen explanations.
I hope you’ll enjoy watching the transformation!
Watch this week’s video here:
LINK HERE
Weekly Question
What’s one repetitive task at your jewelry bench that you’ve found a better way to accomplish?
Maybe you’ve developed a shortcut, modified a tool, created a jig, or simply changed the way you approach a particular job.
Or perhaps there’s something you’ve been doing the same way for years that you know could be improved.
I’d love to hear about it!
Reply to this email and share your experience. You never know—your idea might be exactly what another jeweler needs to hear.
Until next time, keep learning, keep creating, and keep looking for ways to improve.
Together, Let’s Make the BEST Jewelry of Your LIFE!
Doug
JewelryMonk Studio
https://www.JewelryMonk.com
Want more like this? Doug shares new techniques, bench videos, and member Q&A on Patreon. Join the Jewelry Monk community on Patreon.
This post originally appeared on Doug’s Patreon.
